CFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD Prototype

News

CFMS releases results for next generation High-Order CFD Prototype

28.09.16

Bristol, 28th September 2016 - The Centre for Modelling & Simulation (CFMS) is pleased to announce that the Hyperflux high order CFD solver prototype is now available at CFMS for industrial and research evaluation. Based on next generation High-Order Flux Reconstruction (HO/FR) CFD methods, the software is the product of a two year research programme with grant assistance from Innovate UK and EPSRC.

Shown to be up to 30x more cost effective than standard 2nd order finite volume CFD methods, CFMS is offering organisations the opportunity to evaluate the working capability, with access to test cases across aerospace, automotive, maritime, civil and renewables engineering.

High-order CFD methods using the flux reconstruction (DG) approach offer new potential for the accurate, efficient simulation of unsteady flows (including acoustics) with shed vortices and wakes, providing higher fidelity solutions than currently achievable with low-order schemes on unstructured grids. The software exploits the full power of modern high performance computing (HPC), particularly heterogeneous configurations of conventional and many-core processors for speed and efficiency.
 

CFMS has led the Hyperflux project, working with Imperial College, experts in high-order (flux reconstruction) Computational Fluid Dynamics (CFD) methods and Zenotech, a CFD software provider and specialist in cloud high performance computing (HPC). The project has led to further work in the aerospace sector (Hyperflux++) supported by the Aerospace Technology Institute (ATI) and Innovate UK - applying this new CFD technology to civil aircraft design.

Sam Paice, Chief Operating Officer commented, “Through Hyperflux, our focus is on enabling the adoption and acceleration of new technologies for advanced modelling and simulation, such as High-Order CFD”.

With many organisations eager to learn more about high-order CFD and try out the method on realistic test cases, CFMS and partners will be holding a free workshop on 11th October 2016, which will outline the high-order method, describe what has been implemented in the code base and show how to set up and run test cases. For more information and register for the event, click here.

Hyperflux is one of several projects within the ‘Towards Zero Prototyping’ Programme run by Innovate UK together with the Engineering and Physical Sciences Research Council (EPSRC). Further dissemination information about the Hyperflux programme is available from CFMS, Zenotech and Imperial College.

About CFMS
The Centre for Modelling & Simulation (CFMS) is proud to be a growing, independent and not-for-profit organisation that specialises in high value design capability. We promote advanced modelling and simulation, underpinned by HPC, pushing the boundaries of technology.
Through our exceptional, collaborative, virtual and physical facility, we enable the adoption and acceleration of new technologies for advanced modelling and simulation, while improving learning and developing awareness of state-of-the-art. Engaging with organisations large and small, we help to provide access to the right tools, resources, skills and technologies, resulting in increased productivity and faster, more informed decision-making.
As a trusted and neutral provider, our vision is to drive a practical revolution in engineering capability and design, working with organisations to reduce risk in the design phase, product development costs and time to market.

For further information about how CFMS can help your business, view the brochure here, call 0117 906 1100 or email info@cfms.org.uk.

Media Contact
Alison Little: e: alison.little@cfms.org.uk, t: 0117 906 1100
 

More news.

+44 (0)117 370 7700 info@bbsp.co.uk

News

  • 01.02.17
  • CFMS to participate in High Value Manufacturing (HVM) Catapult Sit-Ski Project
  • Bristol, 1st February 2017 - The Centre for Modelling & Simulation (CFMS) today announced it will be participating in the Sit-Ski Project, led by the High Value Manufacturing (HVM) Catapult. Working with two Great Britain (GB) Paralympic downhill skiers, this exciting new project will showcase the best of British technology through a redesign of a customised sit-ski appliance, used by para-alpine skiers.

  • Read more.
  • 08.11.16
  • UK solar car racing team signs CFMS as sponsor, gets access to Cray supercomputer for car design modelling
  • Aerodynamics modelled using computational fluid dynamics - cuts testing from days to minutes

    The UK based solar racing team, Solar Team Great Britain, that is aiming to be the first British team to win the Bridgestone World Solar Challenge, has today announced it has signed the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, as a strategic sponsor.
  • Read more.
  • 07.11.16
  • Minister for Industry and Energy visits Bristol and Bath Science Park
  • Jesse Norman, Minister for Industry and Energy visited Bristol and Bath Science Park (BBSP), meeting with the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, and HiETA Technologies, experts in Additive Manufacturing (AM).
  • Read more.

Event

  • 28.02.17
  • CFMS Big Breakfast
  • The Centre for Modelling & Simulation (CFMS), will be hosting its annual ‘The Big Breakfast Event’ on 28th February 2017, 8-10.30am. Held at Bristol and Bath Science Park, CFMS is inviting customers, members, partners, neighbouring tenants and businesses from Bristol and the surrounding area to join them for breakfast.
  • Read more.
  • 21.03.17
  • Introducing EPIC and HPC in the Cloud
  • The Centre for Modelling & Simulation (CFMS) and Zenotech will be holding a breakfast briefing on the topic of High Performance Computing (HPC) in the Cloud as part of its facilitated breakfast series.
  • Read more.
  • 09.05.17
  • South Glos Expo
  • The Inaugural South Glos Expo will give sole traders, microbusinesses and SMEs based in South Gloucestershire and those wishing to become known in the area the opportunity to showcase their products and services.
  • Read more.
CFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD Prototype

News

CFMS releases results for next generation High-Order CFD Prototype

28.09.16

Bristol, 28th September 2016 - The Centre for Modelling & Simulation (CFMS) is pleased to announce that the Hyperflux high order CFD solver prototype is now available at CFMS for industrial and research evaluation. Based on next generation High-Order Flux Reconstruction (HO/FR) CFD methods, the software is the product of a two year research programme with grant assistance from Innovate UK and EPSRC.

Shown to be up to 30x more cost effective than standard 2nd order finite volume CFD methods, CFMS is offering organisations the opportunity to evaluate the working capability, with access to test cases across aerospace, automotive, maritime, civil and renewables engineering.

High-order CFD methods using the flux reconstruction (DG) approach offer new potential for the accurate, efficient simulation of unsteady flows (including acoustics) with shed vortices and wakes, providing higher fidelity solutions than currently achievable with low-order schemes on unstructured grids. The software exploits the full power of modern high performance computing (HPC), particularly heterogeneous configurations of conventional and many-core processors for speed and efficiency.
 

CFMS has led the Hyperflux project, working with Imperial College, experts in high-order (flux reconstruction) Computational Fluid Dynamics (CFD) methods and Zenotech, a CFD software provider and specialist in cloud high performance computing (HPC). The project has led to further work in the aerospace sector (Hyperflux++) supported by the Aerospace Technology Institute (ATI) and Innovate UK - applying this new CFD technology to civil aircraft design.

Sam Paice, Chief Operating Officer commented, “Through Hyperflux, our focus is on enabling the adoption and acceleration of new technologies for advanced modelling and simulation, such as High-Order CFD”.

With many organisations eager to learn more about high-order CFD and try out the method on realistic test cases, CFMS and partners will be holding a free workshop on 11th October 2016, which will outline the high-order method, describe what has been implemented in the code base and show how to set up and run test cases. For more information and register for the event, click here.

Hyperflux is one of several projects within the ‘Towards Zero Prototyping’ Programme run by Innovate UK together with the Engineering and Physical Sciences Research Council (EPSRC). Further dissemination information about the Hyperflux programme is available from CFMS, Zenotech and Imperial College.

About CFMS
The Centre for Modelling & Simulation (CFMS) is proud to be a growing, independent and not-for-profit organisation that specialises in high value design capability. We promote advanced modelling and simulation, underpinned by HPC, pushing the boundaries of technology.
Through our exceptional, collaborative, virtual and physical facility, we enable the adoption and acceleration of new technologies for advanced modelling and simulation, while improving learning and developing awareness of state-of-the-art. Engaging with organisations large and small, we help to provide access to the right tools, resources, skills and technologies, resulting in increased productivity and faster, more informed decision-making.
As a trusted and neutral provider, our vision is to drive a practical revolution in engineering capability and design, working with organisations to reduce risk in the design phase, product development costs and time to market.

For further information about how CFMS can help your business, view the brochure here, call 0117 906 1100 or email info@cfms.org.uk.

Media Contact
Alison Little: e: alison.little@cfms.org.uk, t: 0117 906 1100
 

More news.

Event

  • 28.02.17
  • CFMS Big Breakfast
  • The Centre for Modelling & Simulation (CFMS), will be hosting its annual ‘The Big Breakfast Event’ on 28th February 2017, 8-10.30am. Held at Bristol and Bath Science Park, CFMS is inviting customers, members, partners, neighbouring tenants and businesses from Bristol and the surrounding area to join them for breakfast.
  • Read more.
  • 21.03.17
  • Introducing EPIC and HPC in the Cloud
  • The Centre for Modelling & Simulation (CFMS) and Zenotech will be holding a breakfast briefing on the topic of High Performance Computing (HPC) in the Cloud as part of its facilitated breakfast series.
  • Read more.
  • 09.05.17
  • South Glos Expo
  • The Inaugural South Glos Expo will give sole traders, microbusinesses and SMEs based in South Gloucestershire and those wishing to become known in the area the opportunity to showcase their products and services.
  • Read more.

News

  • 01.02.17
  • CFMS to participate in High Value Manufacturing (HVM) Catapult Sit-Ski Project
  • Bristol, 1st February 2017 - The Centre for Modelling & Simulation (CFMS) today announced it will be participating in the Sit-Ski Project, led by the High Value Manufacturing (HVM) Catapult. Working with two Great Britain (GB) Paralympic downhill skiers, this exciting new project will showcase the best of British technology through a redesign of a customised sit-ski appliance, used by para-alpine skiers.

  • Read more.
  • 08.11.16
  • UK solar car racing team signs CFMS as sponsor, gets access to Cray supercomputer for car design modelling
  • Aerodynamics modelled using computational fluid dynamics - cuts testing from days to minutes

    The UK based solar racing team, Solar Team Great Britain, that is aiming to be the first British team to win the Bridgestone World Solar Challenge, has today announced it has signed the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, as a strategic sponsor.
  • Read more.
  • 07.11.16
  • Minister for Industry and Energy visits Bristol and Bath Science Park
  • Jesse Norman, Minister for Industry and Energy visited Bristol and Bath Science Park (BBSP), meeting with the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, and HiETA Technologies, experts in Additive Manufacturing (AM).
  • Read more.

CFMS releases results for next generation High-Order CFD Prototype

+44 (0)117 370 7700

info@bbsp.co.uk

Event

  • 28.02.17
  • CFMS Big Breakfast
  • The Centre for Modelling & Simulation (CFMS), will be hosting its annual ‘The Big Breakfast Event’ on 28th February 2017, 8-10.30am. Held at Bristol and Bath Science Park, CFMS is inviting customers, members, partners, neighbouring tenants and businesses from Bristol and the surrounding area to join them for breakfast.
  • Read more.
  • 21.03.17
  • Introducing EPIC and HPC in the Cloud
  • The Centre for Modelling & Simulation (CFMS) and Zenotech will be holding a breakfast briefing on the topic of High Performance Computing (HPC) in the Cloud as part of its facilitated breakfast series.
  • Read more.
  • 09.05.17
  • South Glos Expo
  • The Inaugural South Glos Expo will give sole traders, microbusinesses and SMEs based in South Gloucestershire and those wishing to become known in the area the opportunity to showcase their products and services.
  • Read more.

News

  • 01.02.17
  • CFMS to participate in High Value Manufacturing (HVM) Catapult Sit-Ski Project
  • Bristol, 1st February 2017 - The Centre for Modelling & Simulation (CFMS) today announced it will be participating in the Sit-Ski Project, led by the High Value Manufacturing (HVM) Catapult. Working with two Great Britain (GB) Paralympic downhill skiers, this exciting new project will showcase the best of British technology through a redesign of a customised sit-ski appliance, used by para-alpine skiers.

  • Read more.
  • 08.11.16
  • UK solar car racing team signs CFMS as sponsor, gets access to Cray supercomputer for car design modelling
  • Aerodynamics modelled using computational fluid dynamics - cuts testing from days to minutes

    The UK based solar racing team, Solar Team Great Britain, that is aiming to be the first British team to win the Bridgestone World Solar Challenge, has today announced it has signed the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, as a strategic sponsor.
  • Read more.
  • 07.11.16
  • Minister for Industry and Energy visits Bristol and Bath Science Park
  • Jesse Norman, Minister for Industry and Energy visited Bristol and Bath Science Park (BBSP), meeting with the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, and HiETA Technologies, experts in Additive Manufacturing (AM).
  • Read more.
CFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD Prototype

News

CFMS releases results for next generation High-Order CFD Prototype

28.09.16

Bristol, 28th September 2016 - The Centre for Modelling & Simulation (CFMS) is pleased to announce that the Hyperflux high order CFD solver prototype is now available at CFMS for industrial and research evaluation. Based on next generation High-Order Flux Reconstruction (HO/FR) CFD methods, the software is the product of a two year research programme with grant assistance from Innovate UK and EPSRC.

Shown to be up to 30x more cost effective than standard 2nd order finite volume CFD methods, CFMS is offering organisations the opportunity to evaluate the working capability, with access to test cases across aerospace, automotive, maritime, civil and renewables engineering.

High-order CFD methods using the flux reconstruction (DG) approach offer new potential for the accurate, efficient simulation of unsteady flows (including acoustics) with shed vortices and wakes, providing higher fidelity solutions than currently achievable with low-order schemes on unstructured grids. The software exploits the full power of modern high performance computing (HPC), particularly heterogeneous configurations of conventional and many-core processors for speed and efficiency.
 

CFMS has led the Hyperflux project, working with Imperial College, experts in high-order (flux reconstruction) Computational Fluid Dynamics (CFD) methods and Zenotech, a CFD software provider and specialist in cloud high performance computing (HPC). The project has led to further work in the aerospace sector (Hyperflux++) supported by the Aerospace Technology Institute (ATI) and Innovate UK - applying this new CFD technology to civil aircraft design.

Sam Paice, Chief Operating Officer commented, “Through Hyperflux, our focus is on enabling the adoption and acceleration of new technologies for advanced modelling and simulation, such as High-Order CFD”.

With many organisations eager to learn more about high-order CFD and try out the method on realistic test cases, CFMS and partners will be holding a free workshop on 11th October 2016, which will outline the high-order method, describe what has been implemented in the code base and show how to set up and run test cases. For more information and register for the event, click here.

Hyperflux is one of several projects within the ‘Towards Zero Prototyping’ Programme run by Innovate UK together with the Engineering and Physical Sciences Research Council (EPSRC). Further dissemination information about the Hyperflux programme is available from CFMS, Zenotech and Imperial College.

About CFMS
The Centre for Modelling & Simulation (CFMS) is proud to be a growing, independent and not-for-profit organisation that specialises in high value design capability. We promote advanced modelling and simulation, underpinned by HPC, pushing the boundaries of technology.
Through our exceptional, collaborative, virtual and physical facility, we enable the adoption and acceleration of new technologies for advanced modelling and simulation, while improving learning and developing awareness of state-of-the-art. Engaging with organisations large and small, we help to provide access to the right tools, resources, skills and technologies, resulting in increased productivity and faster, more informed decision-making.
As a trusted and neutral provider, our vision is to drive a practical revolution in engineering capability and design, working with organisations to reduce risk in the design phase, product development costs and time to market.

For further information about how CFMS can help your business, view the brochure here, call 0117 906 1100 or email info@cfms.org.uk.

Media Contact
Alison Little: e: alison.little@cfms.org.uk, t: 0117 906 1100
 

More news.

CFMS releases results for next generation High-Order CFD Prototype

CFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD Prototype

News

CFMS releases results for next generation High-Order CFD Prototype

28.09.16

Bristol, 28th September 2016 - The Centre for Modelling & Simulation (CFMS) is pleased to announce that the Hyperflux high order CFD solver prototype is now available at CFMS for industrial and research evaluation. Based on next generation High-Order Flux Reconstruction (HO/FR) CFD methods, the software is the product of a two year research programme with grant assistance from Innovate UK and EPSRC.

Shown to be up to 30x more cost effective than standard 2nd order finite volume CFD methods, CFMS is offering organisations the opportunity to evaluate the working capability, with access to test cases across aerospace, automotive, maritime, civil and renewables engineering.

High-order CFD methods using the flux reconstruction (DG) approach offer new potential for the accurate, efficient simulation of unsteady flows (including acoustics) with shed vortices and wakes, providing higher fidelity solutions than currently achievable with low-order schemes on unstructured grids. The software exploits the full power of modern high performance computing (HPC), particularly heterogeneous configurations of conventional and many-core processors for speed and efficiency.
 

CFMS has led the Hyperflux project, working with Imperial College, experts in high-order (flux reconstruction) Computational Fluid Dynamics (CFD) methods and Zenotech, a CFD software provider and specialist in cloud high performance computing (HPC). The project has led to further work in the aerospace sector (Hyperflux++) supported by the Aerospace Technology Institute (ATI) and Innovate UK - applying this new CFD technology to civil aircraft design.

Sam Paice, Chief Operating Officer commented, “Through Hyperflux, our focus is on enabling the adoption and acceleration of new technologies for advanced modelling and simulation, such as High-Order CFD”.

With many organisations eager to learn more about high-order CFD and try out the method on realistic test cases, CFMS and partners will be holding a free workshop on 11th October 2016, which will outline the high-order method, describe what has been implemented in the code base and show how to set up and run test cases. For more information and register for the event, click here.

Hyperflux is one of several projects within the ‘Towards Zero Prototyping’ Programme run by Innovate UK together with the Engineering and Physical Sciences Research Council (EPSRC). Further dissemination information about the Hyperflux programme is available from CFMS, Zenotech and Imperial College.

About CFMS
The Centre for Modelling & Simulation (CFMS) is proud to be a growing, independent and not-for-profit organisation that specialises in high value design capability. We promote advanced modelling and simulation, underpinned by HPC, pushing the boundaries of technology.
Through our exceptional, collaborative, virtual and physical facility, we enable the adoption and acceleration of new technologies for advanced modelling and simulation, while improving learning and developing awareness of state-of-the-art. Engaging with organisations large and small, we help to provide access to the right tools, resources, skills and technologies, resulting in increased productivity and faster, more informed decision-making.
As a trusted and neutral provider, our vision is to drive a practical revolution in engineering capability and design, working with organisations to reduce risk in the design phase, product development costs and time to market.

For further information about how CFMS can help your business, view the brochure here, call 0117 906 1100 or email info@cfms.org.uk.

Media Contact
Alison Little: e: alison.little@cfms.org.uk, t: 0117 906 1100
 

More news.

Event

  • 28.02.17
  • CFMS Big Breakfast
  • The Centre for Modelling & Simulation (CFMS), will be hosting its annual ‘The Big Breakfast Event’ on 28th February 2017, 8-10.30am. Held at Bristol and Bath Science Park, CFMS is inviting customers, members, partners, neighbouring tenants and businesses from Bristol and the surrounding area to join them for breakfast.
  • Read more.
  • 21.03.17
  • Introducing EPIC and HPC in the Cloud
  • The Centre for Modelling & Simulation (CFMS) and Zenotech will be holding a breakfast briefing on the topic of High Performance Computing (HPC) in the Cloud as part of its facilitated breakfast series.
  • Read more.
  • 09.05.17
  • South Glos Expo
  • The Inaugural South Glos Expo will give sole traders, microbusinesses and SMEs based in South Gloucestershire and those wishing to become known in the area the opportunity to showcase their products and services.
  • Read more.

News

  • 01.02.17
  • CFMS to participate in High Value Manufacturing (HVM) Catapult Sit-Ski Project
  • Bristol, 1st February 2017 - The Centre for Modelling & Simulation (CFMS) today announced it will be participating in the Sit-Ski Project, led by the High Value Manufacturing (HVM) Catapult. Working with two Great Britain (GB) Paralympic downhill skiers, this exciting new project will showcase the best of British technology through a redesign of a customised sit-ski appliance, used by para-alpine skiers.

  • Read more.
  • 08.11.16
  • UK solar car racing team signs CFMS as sponsor, gets access to Cray supercomputer for car design modelling
  • Aerodynamics modelled using computational fluid dynamics - cuts testing from days to minutes

    The UK based solar racing team, Solar Team Great Britain, that is aiming to be the first British team to win the Bridgestone World Solar Challenge, has today announced it has signed the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, as a strategic sponsor.
  • Read more.
  • 07.11.16
  • Minister for Industry and Energy visits Bristol and Bath Science Park
  • Jesse Norman, Minister for Industry and Energy visited Bristol and Bath Science Park (BBSP), meeting with the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, and HiETA Technologies, experts in Additive Manufacturing (AM).
  • Read more.

CFMS releases results for next generation High-Order CFD Prototype

CFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD PrototypeCFMS releases results for next generation High-Order CFD Prototype

News

CFMS releases results for next generation High-Order CFD Prototype

28.09.16

Bristol, 28th September 2016 - The Centre for Modelling & Simulation (CFMS) is pleased to announce that the Hyperflux high order CFD solver prototype is now available at CFMS for industrial and research evaluation. Based on next generation High-Order Flux Reconstruction (HO/FR) CFD methods, the software is the product of a two year research programme with grant assistance from Innovate UK and EPSRC.

Shown to be up to 30x more cost effective than standard 2nd order finite volume CFD methods, CFMS is offering organisations the opportunity to evaluate the working capability, with access to test cases across aerospace, automotive, maritime, civil and renewables engineering.

High-order CFD methods using the flux reconstruction (DG) approach offer new potential for the accurate, efficient simulation of unsteady flows (including acoustics) with shed vortices and wakes, providing higher fidelity solutions than currently achievable with low-order schemes on unstructured grids. The software exploits the full power of modern high performance computing (HPC), particularly heterogeneous configurations of conventional and many-core processors for speed and efficiency.
 

CFMS has led the Hyperflux project, working with Imperial College, experts in high-order (flux reconstruction) Computational Fluid Dynamics (CFD) methods and Zenotech, a CFD software provider and specialist in cloud high performance computing (HPC). The project has led to further work in the aerospace sector (Hyperflux++) supported by the Aerospace Technology Institute (ATI) and Innovate UK - applying this new CFD technology to civil aircraft design.

Sam Paice, Chief Operating Officer commented, “Through Hyperflux, our focus is on enabling the adoption and acceleration of new technologies for advanced modelling and simulation, such as High-Order CFD”.

With many organisations eager to learn more about high-order CFD and try out the method on realistic test cases, CFMS and partners will be holding a free workshop on 11th October 2016, which will outline the high-order method, describe what has been implemented in the code base and show how to set up and run test cases. For more information and register for the event, click here.

Hyperflux is one of several projects within the ‘Towards Zero Prototyping’ Programme run by Innovate UK together with the Engineering and Physical Sciences Research Council (EPSRC). Further dissemination information about the Hyperflux programme is available from CFMS, Zenotech and Imperial College.

About CFMS
The Centre for Modelling & Simulation (CFMS) is proud to be a growing, independent and not-for-profit organisation that specialises in high value design capability. We promote advanced modelling and simulation, underpinned by HPC, pushing the boundaries of technology.
Through our exceptional, collaborative, virtual and physical facility, we enable the adoption and acceleration of new technologies for advanced modelling and simulation, while improving learning and developing awareness of state-of-the-art. Engaging with organisations large and small, we help to provide access to the right tools, resources, skills and technologies, resulting in increased productivity and faster, more informed decision-making.
As a trusted and neutral provider, our vision is to drive a practical revolution in engineering capability and design, working with organisations to reduce risk in the design phase, product development costs and time to market.

For further information about how CFMS can help your business, view the brochure here, call 0117 906 1100 or email info@cfms.org.uk.

Media Contact
Alison Little: e: alison.little@cfms.org.uk, t: 0117 906 1100
 

More news.

Event

  • 28.02.17
  • CFMS Big Breakfast
  • The Centre for Modelling & Simulation (CFMS), will be hosting its annual ‘The Big Breakfast Event’ on 28th February 2017, 8-10.30am. Held at Bristol and Bath Science Park, CFMS is inviting customers, members, partners, neighbouring tenants and businesses from Bristol and the surrounding area to join them for breakfast.
  • Read more.
  • 21.03.17
  • Introducing EPIC and HPC in the Cloud
  • The Centre for Modelling & Simulation (CFMS) and Zenotech will be holding a breakfast briefing on the topic of High Performance Computing (HPC) in the Cloud as part of its facilitated breakfast series.
  • Read more.
  • 09.05.17
  • South Glos Expo
  • The Inaugural South Glos Expo will give sole traders, microbusinesses and SMEs based in South Gloucestershire and those wishing to become known in the area the opportunity to showcase their products and services.
  • Read more.

News

  • 01.02.17
  • CFMS to participate in High Value Manufacturing (HVM) Catapult Sit-Ski Project
  • Bristol, 1st February 2017 - The Centre for Modelling & Simulation (CFMS) today announced it will be participating in the Sit-Ski Project, led by the High Value Manufacturing (HVM) Catapult. Working with two Great Britain (GB) Paralympic downhill skiers, this exciting new project will showcase the best of British technology through a redesign of a customised sit-ski appliance, used by para-alpine skiers.

  • Read more.
  • 08.11.16
  • UK solar car racing team signs CFMS as sponsor, gets access to Cray supercomputer for car design modelling
  • Aerodynamics modelled using computational fluid dynamics - cuts testing from days to minutes

    The UK based solar racing team, Solar Team Great Britain, that is aiming to be the first British team to win the Bridgestone World Solar Challenge, has today announced it has signed the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, as a strategic sponsor.
  • Read more.
  • 07.11.16
  • Minister for Industry and Energy visits Bristol and Bath Science Park
  • Jesse Norman, Minister for Industry and Energy visited Bristol and Bath Science Park (BBSP), meeting with the Centre for Modelling & Simulation (CFMS), a specialist in high value design capability, and HiETA Technologies, experts in Additive Manufacturing (AM).
  • Read more.